Radar Level Transmitter

TKWL-1100 Intelligent Radar Level transmitter

Radar Level transmitter
Intelligent Radar Level transmitter
Product description: China TianKang Intelligent TKWL-1100 Intelligent Radar Level transmitter measurement outputs 4-20Ma analog signals, and the largest distance of measurement can reach 70 meters. The antenna is further
INQUIRY

China TianKang Intelligent TKWL-1100 Intelligent Radar Level transmitter measurement outputs 4-20Ma analog signals, and the largest distance of measurement can reach 70 meters. The antenna is further optimized and processed, the new rapid microprocessor can conduct higher rate signal analysis and processing, making the instrument applicable to very complex measurement conditions like reaction still orsolid stock bin.
China TianKang Intelligent TKWL-1100 Intelligent Radar Level transmitter Principle

TKWL1100 intelligent radar level meter measurement outputs 4-20Ma analog signals, and the largest distance of measurement can reach 70 meters. The antenna is further optimized and processed, the new rapid microprocessor can conduct higher rate signal analysis and processing, making the instrument applicable to very complex.

China TianKang Intelligent TKWL-1100 Intelligent Radar Level transmitter Features
The radar level meter adopts the emission frequency of 26GHz, and thus features:
A.It can realize non-contact measurement, which is non-abrasion and non-pollution
B.Its smaller antenna size makes it easy to install
C.Shorter wave length, which can realize better reflection on the oblique solid surface
D.Smaller measurement dead zone can help small tank measurement achieve good effect
E.The smaller filed angle and concentrated energy enhance the echo ability and is in favor of avoid the interfer&nt
F.It is hardly influenced by erosion and foam
G.It is hardly influenced by vapor, temperature and pressure changes in the atmosphere
H.In serious dust environment, the instrument can accurately read the echo of real material level
I.Its high signal-to noise ratio can help achieve better performance even under fluctuations
J.26GHz frequency is the best selection to measure solid and medium of low dielectric constant.
Information of TKWL-1100 Intelligent Radar Level transmitter Models

radar level gauge manufacturer

TKWL-1100 Intelligent Radar Level transmitter Selection points
The correct selection of the radar level gauge can ensure the better use of the radar level gauge. What kind of radar level gauge should be used should be determined according to the physical and chemical properties of the fluid medium to be measured? The diameter, flow range, lining material, electrode material and output current of the radar level gauge can be adapted to the measured fluid. The nature of the fluid and the requirements for flow measurement.
1. Precise function inspection
Accuracy grade and function Select the instrument accuracy grade according to the measurement requirements and use occasions, so as to be economical and cost-effective. For example, for trade settlement, product handover and energy metering, you should choose a higher accuracy level, such as 1.0, 0.5, or higher; for process control, choose different accuracy levels according to the control requirements; some only It is to check the process flow and do not need to do precise control and measurement. You can choose a lower accuracy level, such as 1.5, 2.5, or even 4.0. At this time, you can choose a cheap plug-in radar level gauge.
2. Measurable medium
Measuring medium flow rate, instrument range and caliber When measuring general medium, the full-scale flow rate of the radar level gauge can be selected within the range of measuring medium flow rate 0.5-12m/s, and the range is relatively wide. The selected instrument specification (caliber) is not necessarily the same as the process pipeline. It should be determined whether the measurement flow range is within the flow rate range, that is, when the flow rate of the pipeline is too low to meet the requirements of the flow meter or when the measurement accuracy cannot be guaranteed at this flow rate, It is necessary to reduce the diameter of the meter to increase the flow rate in the tube and obtain satisfactory measurement results.
The intelligent radar level gauge is suitable for non-contact continuous measurement of the level of liquids, slurries and granular materials. It is suitable for occasions with large temperature and pressure changes; inert gases and volatilization. The microwave pulse measurement method is adopted, and it can work normally in the industrial frequency band. The beam energy is low, and it can be installed in various metal and non-metal containers or pipelines without harm to the human body or the environment. For more selections of radar level gauges, please refer to the selection documents,TKWL-1100 Intelligent Radar Level transmitter.

PREVIOUS：UQK-60 Float level controller NEXT：TKWL -1200 Intelligent Radar level gauge